If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Vanadium carbonide exhibits good thermal and electrical conductivity. Therefore, it is used extensively in fields such as iron and steel metal metallurgy.
Purity: 99%
Size:325mesh
Vanadium Carbide VC Pulver:
Vanadium carbonideis an inorganic compound.
Vanadium carbonide formula VC. Black cubic crystals.
vanadium carbide melting points are 2810°C;
vanadium carbide boiling points
are 3900°C. The relative density is 5.77. It is slightly harder that quartz, at 9-9.5 Moher. It is the strongest known metal carbide. Vanadium carbide occurs in many vanadium metals, and alloys. Vanadium pentoxide can be reduced with coke to make vanadium carbide. This is the main use of vanadium pentoxide in making vanadium steel. These additives can be used to make cemented carbonide.
It is similar in structure to vanadium monooxide, and crystallizes within the rock salt structure. VC and VO can be dissolved in each other, so VC samples often contain oxide impurities. It is formed by heating vanadium dioxide and carbon to a temperature of approximately 1000°C. At higher temperatures, VC will convert to V2C.
To receive the latest Vanadium carbide price, please send us an inquiry.
Performance of of of Vanadium Carbide VC Powder :
Vanadium carbide,Chemical formula: VC, Molecular weight 62.95; Carbon content 19.08%; Density 5.41g/cm3 (Melting Point 2800oC), Boiling Point 3900oC). The vanadium metal carbide is a gray metallic dust with a cubic-system structure of NaCl, the crystalline constant being 4.182A. It is extremely chemically stable with excellent high temperature properties. The carbide can be used to cut steel and in other industries. Additionally, it can be used to refine the WC Cemented Carbide crystal to increase the properties of the alloy.
Vanadium carbide VC powder technical parameters :
ITEM |
Chemical Composition % |
Particle Size |
|
|
|
|
O |
VC Powder |
99 |
19 |
0.03 |
0.05 |
0.4 |
0.2 |
325 |
How does Vanadium Carbide VC Powder get made?
1.Complete the Vanadium dioxide and carbon powder. Carbonized vanadium must be made under very high vacuum conditions.
2.Pure VC may be obtained by the gas phase reaction method. You can make pure VC from hydrogen-containing tetrachloride (VCl4 vapor) and hydrocarbon gases (methane or benzene). It is attached to a tungsten-wire directly and energized in order to heat it. To prevent the formation of metal vanadium in the initial stages of the reaction, the temperature at which the tungsten is heated must not exceed 1400° C. It is then heated to 2000 °C to finish the carbonization process. A gray-white crystalline is formed by the precipitation process of the tungstenwire.
3.Preparation using metal vanadium. Use the metallic vanadium powder, or hydrogenated vanadium, to prepare the mold. Pressurized vanadium will be obtained by mixing the metal with high pressure, about 3 ton/cm 2. The powdered vanadium is heated up to 1800 ° C in a vacuum, and then stored in a graphite container. ).
4. Reduce the amount of carbon powder. You can prepare carbonized vanadium at temperatures of up to 1300 ° C, or even higher in high vacuum conditions.
Applications for VanadiumCarbide VC powder:
Vanadium carbide can be used in many different applications. The addition of vanadium carbonide to steel will improve its wear resistance, corrosion resistance as well as toughness, toughness, strength and thermal fatigue resistance. This material can also be used in wear-resistant cutting tools.
Vanadium Carbide has been widely utilized as a catalyst for novel hydrocarbon reactions due to its high activity and selectivity.
Vanadium Carbide is also a source of new carbon to produce diamond. Vanadium Carbide’s primary role in the fields of cemented carbide, cermet and diamond is to act as a grain inhibitor. It can be used effectively to stop the growth of WC seeds during sintering.
Vanadium carbonide is an additive to cemented carbide. It helps to fine tune the crystals of carbide and increases the hardness in the inserts.
Vanadium Carbide is a useful ingredient in some industries such as the steelmaking and cemented carbide. It can also be used to refine grains.
Vanadium Carbide can be used for the cutting of hard alloys as well producing wear-resistant and semiconductor films.
Storage condition of Vanadium Carbide, VC Powder:
Vanadium carbide VC powder should be kept in a dry, cool environment. It should not be exposed to the air.
Packing & Shipping of Vanadium Carbide VC powder :
You can pack it in two plastic bags with the inside.
Vanadium carbide VC powder packing: vacuum packaging, 100g to 500g, 1 kg/bag, 25kg/barrel and as per your request.
Vanadium carbide VC powder shipping: can be sent by sea, air or express once payment receipt has been received.
Lempotee Nano Technology Co. Ltd.
Send us an enquiry if you’re looking for vanadium carbide powder of high quality. (brad@ihpa.net)
Vanadium Carbide Properties
|
vanadium(IV), vanadium monocarbide and | VC powder
12070-10-9 |
Compound Formula |
|
Molecular Weigh |
62.95 |
Appearance |
Black Powder |
Melting Point |
2810 °C |
Heating Point |
N/A |
Density |
5.77 g/cm3 |
Solubility of H2O |
N/A |
Exact |
66.975266 |
Safety & Health Information
|
Warning |
Hazard Statements |
H228-H315-H319-H335 |
Hazard Codes |
F. Xi |
Risk Codes |
N/A |
Security Statements |
N/A |
Transport Information |
UN3178 4.1/PG II |
Inquiry us
