If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Introduction to Inconel625 Alloy
Inconel 625
It is high-performance
nickel-chromium-molybdenum alloy
This alloy is known for its strong strength, high temperature resistance and resistance to corrosion. Superalloys are primarily composed of nickel (min. 55 %, followed by nickel, molybdenum (min.
Inconel 625 Alloy Composition
Inconel 625 Alloy Properties
Material with special strength
Inconel 625 has a strength that is due not only to the NiCr matrix, however also to the hardening mechanism niobium/molybdenum. Because of the interactions between molybdenum niobium amolium, the alloy matrix provides high strength and low precipitation hardening. The alloy has a yield strength of 690 MPa, and a tensile resistance of 275 MPa.
Resistant to extreme temperatures
Inconel 625 can withstand extreme temperatures, from extremely low to very high. It has a melting temperature of about 1300°C and a thermal extension coefficient of 1.28x 10-5/K (at 20°C).
Inconel 625 is formed naturally by a protective layer of titanium and nickel when exposed to high temperatures of an oxidizer.
It resists corrosion
Inconel 625’s unique mixture of components renders it highly resistant against corrosive substances. The Inconel 625 superalloy performs well in saltwater seawater. It also works in normal atmospheric conditions.
Nickel-chromium’s substrate in Inconel 625 protects the material from oxidants. The material is also protected from pitting by molybdenum. 15.5% sulfuric acid has a min. Material corrosion occurs at 0.188 mm/year in 15% sulfuric Acid.
Capacity to manufacture at high levels
Inconel 625 has a better weldability rating than other alloys. It shows no cracking when subjected to heat and strain. The superalloy’s excellent creep resistance and yield strength makes it a popular choice for factory equipment and piping that requires welding.
Inconel 625 Alloy Application
Inconel 625 was invented in the 1960s in order to make a material suitable for steam pipes. To make the material more resistant to creep and easier to weld, some modifications to its original composition were made. Inconel625 is being used across a variety of industries including the chemical processing and marine nuclear sectors to produce pumps and valves as well as other high pressure equipment.
Inconel alloy 625 has remarkable resistance to corrosion and oxidation. It can withstand high stress in and out water as well as a broad temperature range. Additionally, it is highly resistant to corrosion when placed in acidic environments. This makes it an excellent choice for marine and nuclear applications.
Alloy625 is widely used across a range of industries such as automotive, aviation, marine, air, oil and gaz, chemical processing, nuclear and others. Heat exchangers include bellows and expansion joints as well as exhaust systems. Fasteners and quick-connect fittings are also common applications.
Inconel 625 Alloy Powder Price
Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity. Unexpected events.
Are you looking for the? latest Inconel 625 Alloy powder price You can email us to request a quote. (brad@ihpa.net)
Inconel 625 Alloy Powder Supplier
Lempotee advanced materials Nano Technology Co. Ltd. (Lempotee), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12-years experience in manufacturing high-quality chemical products.
Send us an enquiry if you’re looking for Inconel 625 Alloy Powder of high quality. (brad@ihpa.net)
Inconel 625 Alloy Composition
| Nickel | 58.0 Min | Silicon | Max 0.50 |
| (Cr.) Chromium | 2.0 to 23.0 | (C.) Carbon | Maximal 0.40 |
| (Fe Iron) | Maximum of 5.0 | (Ti) Titanium | Maximal 0.40 |
| (Mo. Molybdenum | 8.0 to 10.0 | (Al.) Aluminium | Max 0.10 |
| (Nb+Ta) Niobium+Tantalum | 3.15 to 4.15 | (Phosphorus) | Max. 0.015 |
| (Co) Cobalt* | Maximum of 1.0 | (Sulfur | Max. 0.015 |
| (Mn) Manganese | Max 0.50 |
Inconel 625 Alloy Properties
Material with special strength
Inconel 625 has a strength that is due not only to the NiCr matrix, however also to the hardening mechanism niobium/molybdenum. Because of the interactions between molybdenum niobium amolium, the alloy matrix provides high strength and low precipitation hardening. The alloy has a yield strength of 690 MPa, and a tensile resistance of 275 MPa.
Resistant to extreme temperatures
Inconel 625 can withstand extreme temperatures, from extremely low to very high. It has a melting temperature of about 1300°C and a thermal extension coefficient of 1.28x 10-5/K (at 20°C).
Inconel 625 is formed naturally by a protective layer of titanium and nickel when exposed to high temperatures of an oxidizer.
It resists corrosion
Inconel 625’s unique mixture of components renders it highly resistant against corrosive substances. The Inconel 625 superalloy performs well in saltwater seawater. It also works in normal atmospheric conditions.
Nickel-chromium’s substrate in Inconel 625 protects the material from oxidants. The material is also protected from pitting by molybdenum. 15.5% sulfuric acid has a min. Material corrosion occurs at 0.188 mm/year in 15% sulfuric Acid.
Capacity to manufacture at high levels
Inconel 625 has a better weldability rating than other alloys. It shows no cracking when subjected to heat and strain. The superalloy’s excellent creep resistance and yield strength makes it a popular choice for factory equipment and piping that requires welding.
| Inconel 625 Alloy Powder Properties | |
| Additional Names | INCO 625 |
| Appearance | Metallic powder |
| Melting Point | 1290-1350 degC |
| Density | 8.44g/cm3 |
3D Printing Inconel Alloy In625 Powder
Inconel 625 Alloy Application
Inconel 625 was invented in the 1960s in order to make a material suitable for steam pipes. To make the material more resistant to creep and easier to weld, some modifications to its original composition were made. Inconel625 is being used across a variety of industries including the chemical processing and marine nuclear sectors to produce pumps and valves as well as other high pressure equipment.
Inconel alloy 625 has remarkable resistance to corrosion and oxidation. It can withstand high stress in and out water as well as a broad temperature range. Additionally, it is highly resistant to corrosion when placed in acidic environments. This makes it an excellent choice for marine and nuclear applications.
Alloy625 is widely used across a range of industries such as automotive, aviation, marine, air, oil and gaz, chemical processing, nuclear and others. Heat exchangers include bellows and expansion joints as well as exhaust systems. Fasteners and quick-connect fittings are also common applications.
Inconel 625 Alloy Powder Price
Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity. Unexpected events.
Are you looking for the? latest Inconel 625 Alloy powder price You can email us to request a quote. (brad@ihpa.net)
Inconel 625 Alloy Powder Supplier
Lempotee advanced materials Nano Technology Co. Ltd. (Lempotee), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12-years experience in manufacturing high-quality chemical products.
Send us an enquiry if you’re looking for Inconel 625 Alloy Powder of high quality. (brad@ihpa.net)
Inquiry us
